Headspace screw vials

Common headspace screw caps are made from metal. Screwing metal on glass, however, causes  much friction. Our screw caps are made from glass-fibre enforced polyamide. They screw smoothly onto our matching headspace vials and require a torque of < 1 Nm only for a pressure-tight seal (common > 8 Nm).

The glass-fibre enforced polyamide screw cap has a magnetic steel ring inserted to allow the use on headspace samplers with magnetic arm.

Design Registration No.: DE 20 2007 008 595.8; Priority Date: 15. June 2007

The advantages:

• pressure-tight seal without strenuous crimping
• cap screws on smoothly as it is made from glass-fibre enforced polyamide
• screw cap may be screwed on manually or mechanically (using 19 hex-nut)
• can be used to a max. of 150° C

The following septum material is available:

• Silicone/PTFE - thickness 3.0 mm - temperature limit 150° C - 40 ± 5° Shore A - clear/white (SKFW)
• Silicone/PTFE - thickness 3.0 mm - temperature limit 150° C - 40 ± 5° Shore A - grey/grey (BZFZ)
• Silicone/PTFE - thickness 1.6 mm - temperature limit 125° C - 40 ± 5° Shore A - white/red (SWFR)