Safety Coated Sample Bottles

slip resistent - reduces risk when handling agressive chemicals

the impact resistang coating reduces breakage

if a bottle should break the clear plastisol holds contents long enough to allow proper disposal

the following bottle types are available safety coated:

Precleaned Sample Bottles

Cleaning Processes for:

Kaptclean®

Ultra Clean

Vacuum & Ionization

Purgeable Volatile Organics in Environmental Samples:

eg. Pesticides, PCB, VOC,
Metals

Chemical and Resin
Sampling Applications

Sterile Samples

Food Industry
(containers 100 % tasteless)

Perfume Industry
(container 100 % odor free)

Sample Bottles, Liners and Caps are:
1. washed in laboratory grade non-phosphate detergent
2. rinsed 3 times with hot water
3. rinsed 3 times with de-ionized water
4. oven dried
in a 3-step cleaning procedure all particles ≥ 5 µm are eliminated
1. Ultrasonically and chemically cleaned, de-ionized water
2. Certified after going through rigid quality control tests
3. all cleaning and testing is carried out in Clean Romms
Contaminants are removed with air that's been compressed in a special area and then filtered so that containers are basically particle free (≤ 0.3 µm)
1. traces of oil, aerosols and fine dust particles are removed
2. gases are removed
3. a vacuum draws the particulate-laden atmosphere out of the container
4. closures are individually cleaned and placed immediately on the treated containers

available bottles:
Kaptclean®

available bottles:
Ultra Clean

available bottles:
Vacuum & Ionization

© infochroma ag, Sumpfstrasse 3, CH-6300 Zug; Tel: +41 41 748 50 60, info@infochroma.ch
pdf 384 kb