Injector Port Septum
11 mm GC Septum with centre hole

G011-ZIPS
11 mm GC Septum
with centre hole, red

moulded GC Septum for Temperature to 400°C

withstands up to 1000 Injections at 400 °C

long life span and reduced coring due to centre hole

specially conditioned to reduce bleed and minimize siloxane contamination
may be used on all instruments
using 11 mm diameter septum
from the infochroma
Production Programme		 Tightening of the
Injector Port 		before the injection
of the needle		 after the injection
of the needle
       
Standard Septum for low Temperature

PTFE coated Silicone

maximum Injector temperature 200°

available diameters:
5 mm, 6 mm, 7 mm, 8 mm, 9 mm 11 mm, 11.5 mm, 12.5 mm, 15 mm
Instrument
specific Selection
Standard Septum for medium Temperature

three layers of silicone, PTFE coated

maximum Injector temperature 280°C

pre-drilled Septum for SPME applications

available diameters:
6 mm, 7 mm, 8 mm, 9 mm, 9.5 mm, 10 mm, 11 mm, 11.5 mm, 12.5 mm, 17 mm

pre-drilled:
4 mm, 5 mm, 7 mm, 9 mm, 10 mm, 11 mm
Instrument
specific Selection
Septum for GC Autosampler with high throughput and manual injection

soft Silicone

maximum Injector temperature 320°C

PTFE coated for up to 350°C

available diameters:
7 mm, 8 mm, 9 mm, 9.5 mm, 11 mm, 12.5 mm 17 mm
Instrument
specific Selection
for Shimadzu GC's

blue high temperature Silicone

maximum Injector temperature 350°C
SGE Quick Pick Guide
for Shimadzu GC's
pdf 1.8 MB
       
ECO Septum

good cost-benefit ratio

maximum Injector temperature 265°C

available diameters:
9 mm, 9.5 mm, 11 mm, 12 mm, 17 mm
Plug for Shimadzu

Product N0.

8C09.0-ECO = 9 mm

8C09.5-ECO = 9.5 mm

8C11-ECO = 11 mm

8C12-ECO = 12 mm

8C17-ECO = 17 mm

8CSP-ECO = Plug for Shimadzu
Long Life Septum for multiple injections

long life span

maximum Injector temperature 290°C

available diameters:
9 mm, 9.5 mm, 11 mm, 12 mm, 17 mm
Plug for Shimadzu

Product No.

8C09.0-LL = 9 mm

8C09.5-LL = 9.5 mm

8C11-LL = 11 mm

8C12-LL = 12 mm

8C17-LL = 17 mm

8CSP-LL = Plug for Shimadzu
High Temperature Septum

minimal Septum bleed even at maximum temperature

long life span

maximum Injector temperature 290°C

available diameters:
9 mm, 9.5 mm, 11 mm, 12 mm, 17 mm Plug for Shimadzu

Product No.

8C09.0-HT = 9 mm

8C09.5-HT = 9.5 mm

8C11-HT = 11 mm

8C12-HT = 12 mm

8C17-HT = 17 mm

8CSP-HT = Plug for Shimadzu
GC Supplies
GC Capillary Columns
GC Syringes
GC Septum
Ferrules
Injector Liner
 


SGE GC Injection Port Septa
pdf 1.4 MB


SGE Instrument
Quick Pick Guide
pdf 2.6 MB


SGE Catalogue
pdf 27.7 MB


Chromacol GC Septa
pdf 1.3 MB
© infochroma ag, Sumpfstr. 3, CH-6300 Zug; Tel: +41 41 748 50 60, info@infochroma.ch last Update 18.08.2011